Fri, 27 Apr 2012 09:00 GMT
For FCC, LEDs lights (bulbs, tubes, lamps) using internal converters with a switching rate over 9kHz shall be tested for part 15B and authorized by the Verification procedure (only verification testing). As such, it is not allowed to print or use the FCC logo, and not appropriate to issue a DoC, neither possible to apply for Certification. Some consider LED as RF lighting, however part 18 devices are devices using RF energy to emit gaz, and this is not the case with LED lights. For more information, contact Teleconformity.
Wed, 18 Apr 2012 17:30 GMT
Energy Star, as TV's get larger, they use more energy, as much as a refrigerator (500kWh). Check the new Energy Star specifications for TV'.
Tue, 13 Mar 2012 13:00 GMT
Israel, following many countries with a new so called MEPS regulation 5771-2011 to save energy, is mandatory as of the beginning of 2012, and affects a range of home and office devices, that shall comply with IS 62301 from now on. For more information, contact Teleconformity.
Fri, 02 Mar 2012 08:30 GMT
Canada, as of April this 2012, external power supplies for audio/video products, including televisions, must be verified by NRCan related to energy efficiency. For more information, contact Teleconformity.
Tue, 21 Feb 2012 15:00 GMT
Teleconformity provides Energy Star Compliance Testing for ITE equipment, such as computers, workstations, servers and imaging equipment such as copiers and printers. For more information, please contact us.
Tue, 20 Dec 2011 09:00 GMT
Russia, since 2009, Russia already has Energy rate labeling requirements for certain household devices, resulting from decree N1222. Now, from 2012-01-01, new products have been added to list of devices under this regulation, such as monitors, printer and or copiers.
Thu, 15 Dec 2011 13:00 GMT
In general, we strongly advise you to check if any Energy Efficiency regulation exists in the markets you sell your equipment. Energy regulations are constantly on the move and updated. Many countries adopt requirements in Europe, California, South Korea, Australia, which all set similar limits. The list of equipment requiring such labeling (and possibly testing as well) is growing fast. If you need assistance, please do not hesitate to contact us. Especially power adapters, equipment with integrated power conversion, ITE and household equipment are frequently listed.
Mon, 21 Nov 2011 09:00 GMT
Ukraine, as of 2012, Ukraine introduces Declaration of Conformity for Electrical Safety for most products, replacing mandatory safety certification for most products. Safety certification though may ease the process of import registration. Energy efficiency requirements and RoHS requirements under preparation, and may become mandatory soon.
Mon, 14 Nov 2011 12:00 GMT
China, CQC issued a notice on energy conservation of ITE Servers (Published: 2011-08-18)
Tue, 25 Oct 2011 08:00 GMT
Canada, on 2011-10-12, Part II of the Canada Gazette announces a new Amendment (number 11) providing changes to Canada's Energy Efficiency Regulations. Products affected are Electrical motors, Residential gas and oil boilers, dry-type transformers, large airconditioners and heat pumps and commercial self-contained refrigeration. Follow the link to read the details.
Mon, 11 Jul 2011 08:10 GMT
Mexico, as of 2011-09-01, the new "yellow" energy labeling regulation by CONUEE and PROFECO will be mandatory, informing the end-users about the kWh consumption of the product. After testing, registration for each model has be concluded. High penalties will be applied when failing with the new requirement as of the date mentioned. The new regulation does apply to the main product only, not to AD/DC power adapters, unless sold separately. Find attached the list of regulated products.
Mon, 27 Jun 2011 06:00 GMT
South Korea, as of 2011-06-01, computer servers will have to comply with the e-Standby energy requirements. The power consumption in standby mode for Single processor equipment (general use) shall not exceed 55W. Requirements for other equipment and more details can be found at the e-Standby website section.
Mon 13 Jun 2011 08:00 GMT
EnOcean is a German wireless, energy harvesting technology used primarily in building automation systems. Follow the link to the EnOcean website to learn more about this technology and its applications.
Sat, 23 Apr 2011 14:00 GMT
Battery-less, RF-powered energy harvesting wireless sensor system targets building and industrial automation. Powerharvester receivers embedded inside the sensor nodes can receive RF energy up to 25 metres away from the Powercaster transmitters broadcasting radio waves at 915 MHz.
Tue, 29 Mar 2011 00:00 GMT
Reporting of a significant breakthrough in the development of battery technology. A research group of the University of Illinois has found a way to enable fast charging and discharging of electrical power while retaining high-energy storage capacity. Find also an earlier article from MIT on the same subject, published in 2009.
Tue, 22 Feb 2011 12:00 GMT
Europe, besides the existing commission Directive 2002/31/EC for household aircos, a new draft regulation EEC/362 is proposed for implementation under the 2009/125/EC framework directive (former 2005/32/EC), setting the minimum energy performance, maximum sound power level and information requirements for air conditioners and comfort fans.
In addition we refer to an earlier working document. For more information, contact Teleconformity.
Tue, 28 Dec 2010 10:00 GMT
Update on Europe's Eco-design and Energy using product regulations:
• Commission Regulation 1062/2010 supplements Directive 2010/30/EU with regard to energy labeling of televisions. It establishes labeling requirements and provisions of supplementary product information for televisions. This Regulation enters into force on the 20th day following its publication in the OJ. It will apply from 2011/11/30, however Article 3(1)(d/e)&4(b/c/d) will apply from 2012/03/30e.
• Commission Regulation 1016/2010 (2010/10/10) implements Directive 2009/125/EC with regard to ecodesign requirements for household dishwashers.
• Commission Regulation 1015/2010 (2010/10/10) implements Directive 2009/125/EC with regard to ecodesign requirements for household washing machines.
Wed, 15 Dec 2010 09:00 GMT
In order to implement recent amendments to the Energy Policy and Conservation Act of 1975 (EPCA), the U.S. Department of Energy (DOE) proposes to amend its test procedures for residential dishwashers, dehumidifiers, and conventional cooking products (which include cooktops, ovens, and ranges) to provide for measurement of standby mode and off mode energy use by these products.
Sun, 28 Nov 2010 15:00 GMT
An electro-exhibition is being held in Hardenberg, The Netherlands from December 7-9. The exhibition is about Electric, Electronic, Switching, Cables, Measurement Equipment, Light, Software, Telecom and ICT, Domotica, Energy Supply, Automation and Security.
Fri, 1 Oct 2010 11:00 GMT
Wattwatt is a community for individuals interested in electrical energy efficiency. We can not live without electricity...Use it efficiently, use less, generate more and reduce global warming. Wattwatt is where you can help make a difference. At Wattwatt you can share your ideas, comment and encourage the most interesting pulses.
Fri, 1 Oct 2010 10:00 GMT
IEC called for a global taskforce to coordinate technology-based energy efficiency initiatives in an effort to increase coherence, and reduce duplication and wasted time, as it launched its white paper, Coping with the Energy Challenge, at the World Energy Congress in Montreal.
Fri, 01 Oct 2010 07:00 GMT
Energy Star introduces third party certification for the ENGERY STAR program. All existing manufacturer/private labeler partners must recommit in order to continue their partnership with EPA to manufacture/label products legible for ENERGY STAR qualification. The deadline for recommitting is 2010/11/30 to avoid partnership interruption. The new Program requirements will be active as of 2011/01/01. Find the revised specifications and the 2010/10/26 memo to the stakeholders, and you can recommit to the program via your "My ENERGY STAR Account" before the end of November!
Tue, 17 Aug 2010 12:00 GMT
Europe, energy limits for on-mode Power consumption and Peak luminance ratio as specified in regulation EC/642/2009 will be in force this friday (2010/08/20). The new requirements require further reduction of power consumption of TV sets and TV monitors.
Wed, 4 Aug 2010 13:00 GMT
Europe, new energy labeling directive 2010/30/EU published (dated 2010/6/18) replacing 92/75/EEC and its amendments.
Thu, 1 Jul 2010 09:00 GMT
Canada, NRCan proposal and effective date of MEPS regulations for External Power Suplies. Read more about global Energy Efficiency and MEPS requirements on the Teleconformity website under Services/Certification/MEPS.
Wed, 16 Jun 2010 14:00 GMT
Malaysian SIRIM's context of Green Technology has been scoped based on the definition issued by the Ministry of Energy, Green Technology and Water and currently encompasses four sectors - energy, building, water and waste management, and transportation.
Wed, 16 Jun 2010 12:00 GMT
GSMA, in february 2009, 17 mobile phone manufacturers took the initiative to move towards marketing power adapters and phones with universal power plug connectors in order to avoid unnecessary waist. In addition, energy efficiency shall meet EU directive 278/2009. The suggested connector is mirco USB standard A for the adapter and USB micro B for the mobile phone. 10 manufacturers covering 90% of the market, signed an agreement with the European Commission that early 2012, the majority of their new mobile devices shall be equipped and supplied with the universal connector. The European Commission also took the initiative for standardization.
Fri, 1 Jan 2010 11:00 GMT
South Korea, MEPS (Minimum Energy Performance Standard) approval for power adapters and chargers becomes mandatory per 2010/1/1. Each importing party must apply for MEPS- KC marking before importing. Please contact Teleconformity for more details.
Mon, 06 Apr 2009 12:00 GMT
European Eco design regulation 278/2009, defining the implementation of the EuP directive the 2005/32/EC. External Power supplies must also comply with the respective energy consumption rules.